Kitesurf Bar SENSOR 3S Core

Core 3S Sensor Bar
Third generation of the Core Sensor bar for kitesurfing

The new 3S Sensor combines the functions of the bar Sensor 3 and Sensor 3+. The 24-meter lines of the bar Core 3S Sensor are divided into 18m, 4m, and 2m, allowing you to adjust the length of the lines as it suits you. The Core quick release system, the CIC (Core Intuitive Connect), it is easily activated by pushing the red quick-release mechanism. It meets the highest safety standards. The Chickenloop it is very easy to reassemble after releasing it. You just have to push the end of the Chickenloop back in the release system until you click, and it will be fully assembled. This mechanism is so simple that you can do it without problems even in the most extreme conditions.

The Sensor 3S it features an automatic soft untangling system for the power lines. You no longer need to manually untangle the lines after a kiteloop or rotation, as this occurs automatically thanks to the ceramic bearings. The lines come from the German manufacturer of kitesurfing lines. Liros, recognized as some of the best on the market. The depower system has been improved with a new easy-to-use cleat, which allows for a safe and simple depower. When the system is adjusted, the depower line contracts to a quarter of its original length, preventing it from getting in the way during navigation. The end can be secured to the cleat with velcro. The bar Core Sensor 3S comes with a practical carrying bag, in which you can store and transport your bar in an organized manner.

The ends of the bar Sensor 3S have been rounded. You can display the Stealth Winder to wind the lines when disassembling the kite. When preparing the kite, once the lines have been unwound, you can fold the Stealth Winder again to create rounded edges on the bar. This way, you will avoid damaging your surfboard if you hit your direccional with the bar Core Sensor 3S. Thanks to the new Stealth Winder and to the system Live Wire, you can easily adjust the width of the bar from 50cm to 46.5cm. The new floats are not attached to the bar, allowing the lines to move more freely. With the system Live Wire, you get a direct feeling of control that makes it easier to handle the kite with one hand, for example, during the board offs. The bar itself is equipped with a new grip Griploc, with a light color scheme to differentiate right and left, which greatly facilitates navigation. Additionally, there is a clear stop indicator and a red line on the back that can save you after a failed bar turn or assist you during preparation.

Features:

• Lines of 24 meters (18 + 4 + 2)
• High "Y" division
• Adjustable between 46.5cm and 50cm
• Release system CIC by push
• Stealth Winders dropdowns
• Direct address with system Live Wire
• New mango Griploc